Millennia LOC Analog Legacy Archival Phono Preamplifier with RIAA + EQ

Millennia LOC Analog Legacy Archival Phono Preamplifier with RIAA + EQ

Key Features:

- For Archiving and Mastering Applications

- 100% Discrete Design Topology

- User-Definable Compensation Parameters

- Works w/ 33-1/3, 45, and 78 RPM Formats

- Four Surgical Filters: Peak and Shelving

- Premium Transformer-less Components

- Lundahl MC Transformers Included

- Low Noise: -125 dBu Flat

- Gold Relays, Connectors, and Switches

- Universal Power Supply

Millennia LOCI Specs

Inputs & Outputs

Inputs     Balanced Phono Input: 4 x XLR

Unbalanced Phono Input: 2 x RCA

Outputs     Balanced Phono Pre Direct Output: 2 x XLR

Balanced Phono Pre Trim Output: 2 x XLR

Unbalanced EQ Out (Pre-Trim): 2 x XLR, 2 x RCA

Balanced EQ Out (Post-Trim): 2 x XLR

Preamp

THD + N     ITHD + Noise (20 Hz to 30 kHz): <.01% typical, RIAA in, filters out

Frequency Response     Frequency Response (-3 dB): 3 Hz to 200 kHz, typical, flat

Frequency Response (±0.5 dB): 10 Hz to 100 kHz typical, flat

Maximum Input Level     +23 dBu

Maximum Output Level     +26 dBu

Maximum Gain     60 dB nominal, higher on request (Preamp + EQ)

Input Impedance     User selectable (resistor/capacitor)

Output Impedance     49.9 )hms, unbalanced

Noise     Better than -125 dB EIN, flat

Better than -98 dB EIN, RIAA in

XLR Configuration     Three-Pin XLR Polarity: Pin 2 = positive polarity, Pin 1 = ground

Equalizer

Equalizer     Maximum Filter Boost & Cut: ±10 dB (21-step detent)

Notch Filter "Q" (Quality Factor): Q = 1.0

Low-Frequency Comp Points: 200, 250, 300, 400, 500/RIAA, 700/USER

High-Frequency Comp Points (@ 10 kHz): -5.0, -7.0, -9.5, -11.5, -13.7/RIAA, -16.0/USER

Low-Filter Fixed Frequencies: 20, 35, 60, 100, 180, 260 Hz

High-Filter Fixed Frequencies: 1.0, 2.0, 3.0, 5.0, 8.0, 12.0 kHz

Peak/Shelf Selection on All Filters: Yes

Bypass Selection on All Bands: Yes

General Specifications

Power Consumption     Power Consumption: 50 W, nominal

Power Requirements     Power Requirements: 100 to 240 VAC, 50/60 Hz, selectable

Fuse Rating     2 x 1A with 100 to 120 VAC mains (5x20 mm, slow-blow, 250 V)

2 x 500 mA with 200 to 240 VAC mains (5x20 mm, slow-blow, 250 V)

Dimensions     19.0 x 15.0 x 3.5" / 48.3 x 38.1 x 8.9 cm

Weight     26.0 lb / 11.8 kg

Packaging Info

Package Weight     24.5 lb

Box Dimensions (LxWxH)     21.3 x 21 x 7.5"