Hitachi Z-HD6000 HDTV Camera Studio Package (No Lens)
| Imaging Device | 2/3", MOS image sensor |
| Total Pixels (H x V) | 2270 x 1144 2.6 million pixels |
| TV System | 1920 x 1080 / 59.94i |
| Optical System | F1.4 prism |
| Optical Filter | 1 x manual filter wheel with 4 filter positions Clear, Cross, 1/16ND, 1/64ND ECC (Electronic Color Corrector) with 5 settings 3200K, 4300K, 5600K, 6300K, 8000K |
| Sensitivity | F10 @ 2000 lux, 3200K, 89.9% reflectance |
| Signal to Noise Ratio | 60 dB (1080i) (typical) |
| Horizontal Resolution | 1100 TVL |
| Registration | 0.01% (excluding lens characteristics) |
| Gain Selection | L (Low): -3, 0 dB M (Medium): 0, +3, +6, +9, +12, +15, +18, +21 dB H (High): +3, +6, +9, +12, +15, +18, +21, +24 dB |
| Electronic Shutter | 1/100, 1/250, 1/500, 1/1000, 1/2000, AES |
| Power Consumption | 16 W head only (without VF) |
| Operating Temperature | 14 to 113°F (-10 to 45°C) |
| Input & Output | 1 x BNC HD-SDI VF out (Character On/Off) or HD-SDI RET out 4-pin Multi-connector 3-pin XLR Mic-1 connector SD memory card slot |
| Dimensions | 5.2 x 7.5 x 10.3" (133 x 191 x 262 mm) |
| Weight | 4.6 lb (2.1 kg) |
| Screen Size | 7" (178 mm) |
| Resolution (H x V) | 1280 x 800 |
| Dot Pitch | 0.117 x 0.117 mm |
| Aspect Ratio | 16:9 / 4:3 switchable |
| Color Depth | 8-bit, 16.7 million colors |
| Brightness | 400 cd/m2 |
| Contrast | 800:1 |
| Response Time | 12 ms |
| Viewing Angle | 178°/178° |
| Voltage Input | 12 VDC, VF main line power supply |
| Power Consumption | <11 W |
| Dimensions | 8.14 x 5.94 x 2.3" (207 x 151 x 60 mm) |
| Weight | <2.2 lb (<1 kg) |
| Genlock | BNC, B-BST 0.45 V p-p/75 Ohms (loop through) HDTV tri-level sync 0.60 V p-p/75 Q (loop through) |
| Digital Return 1/2 | BNC, HD-SDI, or SD-SDI |
| Prompter Input | BNC, VS, or VBS 1.0 V p-p/75 Ohms (loop through) |
| Intercom | 5-pin XLR, -60 dBm |
| Communication | 1 x D-sub 25-pin Intercom: 0 dBm, 600 Ohms/ 4-Wire, 0 dBu, or -15 dBu, 200 Ohms with 2-wires PGM: 0 dBm, 600 Ohms R/G TALLY: Contact or DC supply Digital Output: 2 x BNC, HD-SDI (embedded audio available), 4 x BNC, HD-SDI or SD-SDI selectable (embedded audio available), HD-SDI or SD-SDI selectable PIX (embedded audio available) |
| Connectors | Mic Output 1: 1 x XLR, 3-pin, 0 dBm / 600 Ohms Mic Output 2: 1 x XLR, 3-pin, 0 dBm / 600 Ohms Intercom (Headset): 1 x XLR, 5-pin, 0 dBu Maximum 15 dB Remote 1: 1 x 4-pin, 1.5 V p-p Remote 2: 1 x 4-pin, 1.5 V p-p RS-232C: 1 x D-sub 9-pin 9600 band Mic Remote: 1 x D-sub 15-pin, Mic 1.2 gain TALLY OUT (R/G Tally): 1 x D-sub 9-pin, Contact 24 VDC 10 mA WFM Control: 1 x D-sub 15-pin, WFM 0-7, 0/5 V |
| Maximum Cable Distance | 3280' (1000 m) with CCU power |
| Power Supply Voltage | 117 VAC @ 60 Hz |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Weight | 19.8 lb (9 kg) |
| CCU | 1 x Type HFOC female connector (LEMO/Tajimi Type) SMPTE-304M-type |
| Video Transmitter | Fully digital, bi-directional, 10-bit, 4:2:2 sampling, SMPTE-274M |
| Intercom | 2 x channel, 5-pin each XLR, channel selection, Mic on/off, volume |
| Audio | 2 x, PGM audio level controls with Channel 1 and 2 intercom mix |
| Power Output | Teleprompter: 1 x 5-pin, 230 VAC, 60 to 100 W, external prompter Tally drive out (depending on configuration accessories) |
| Microphones | Channel 1 & 2 Line or MIC level select (Menu), with phantom power on/off |
| Switcher | Return / Aux: 2-channel, 4-input remote AUX/VF video select connector (RET control) |
| Video Input & Outputs | 2 x HD-SDI out, 1 x SD analog teleprompter out switchable with, 1 x Genlock in (Tri-level) |
| Other I/O | 1 x 29-pin (for SA-1000 cable-less interface) 1 x 4-pin script lamp 12 VDC (1.0 A maximum) 1 x 5-pin VF AUX return (for use in cranes or extended Head/VF configurations) 1 x 4-pin XLR, 12 VDC, power input |
| Weight | 4.8 lb (2.2 kg) |
| Power Input | 12 VDC |
| Operational Temperature | 32 to 104°F (0 to 40°C) |
| Dimensions | VR Knob: 4.56 x 7.16 x 2.4" (116 x 182 x 60 mm) |
| Weight | 3.3 lb (1.5 kg) |
